AFR cylinder head logo

AFR Small Block Ford Cylinder Heads
Small Block Ford 220cc runner Race Cylinder Heads
with current pricing

AFR 220cc Aluminum Performance 20° Cylinder Heads-

click here to enlarge AFR Cylinder Head Image
afr cylinder head

*--click here to see cylinder head listings and pricing--
*--new 220cc flow a massive 340 CFM, averaging an 11 CFM increase from .200-.800 lift over our previous best SBF in spite of its 5cc smaller intake runner--
*--lightweight 8mm 2.100 intake valves and 1.570 exhaust valves, combustion chamber volumes of 58cc or 72cc, exh ports and bolt pattern are raised .375 (3/8”) higher than stock, but this rarely affects header or chassis fitment--
*--Exhaust port is drilled for standard 2” spacing that fit factory headers and also drilled for 3” spacing to accept larger O.D. headers--
*--AFR’s new 220cc is the perfect choice for 347 through 427 CI Windsor engines operating between 4500 to 8500 rpm--
*--With the largest intake and exhaust runner volumes for our in-line Ford line up, these are the ultimate for NMRA Renegade or Hot Street classes--also has standard 2” spacing and 3” spacing for larger O.D. headers that fit factory and aftermarket headers
*--see basic parts list for the included parts in the head assembly and some suggestions on manifolds and gaskets--
*--A 3/4” thick head deck makes the AFR head ideal for nitrous or blower applications--great tech help @
Note:High flow 2.100 valves might require aftermarket pistons notched for valve clearance--Will not accept rail type rocker arms--Hardened push rods required on all applications due to the hardened guide plate being used--

If you need assistance in selecting the best AFR cylinder head for your application, you may want to e-mail a description of your combination or call 856-767-4095 or 856-767-7740, and we'll see if we can help out.

ups logo credit card logo

FREE ground SHIPPING inside the continental USA on purchases over $2900.00--allow about 2-3 weeks for Cylinder Head orders to ship--
check out AFR SBF Cylinder Head Options to add a few items you may need--

Don't forget to join us onFacebook logo our facebook page

SBF 220cc runner go to
Flow Charts
go to
SBF Head Options
afr cylinder headAFR SBF 220cc Cylinder Head
Note the dual exhaust bolt pattern (pictured at left) with standard 2” spacing and 3” spacing for larger O.D. headers, included on the 195cc Comp package, 205cc and the 220cc cylinder head
ideal for the 347-427cid windsor based track engines operating from 4500rpm to 8500rpm--
  see basic parts list for the parts included in the head assembly and some suggestions on manifolds and gaskets--- 
see    SBF Cyl Head Options valve spring, titanium retainers, valve upgrades or CC rocker arms-
cc stud mount
or pedestal
part # v/dia. runner
spring retainer seat pressure open pressure max. lift price/pair buy
7/16 stud 1455 2.10/1.570 220 Bare heads have full cnc port/comp valve job-58cc $1909.93
1451 2.10/1.57 220 1.550 steel 225 600lbs .710 $2133.03
7/16 stud 1457 2.10/1.570 220 Bare heads have full cnc port/comp valve job-72cc $1909.93
1456 2.10/1.570 220 1.550 steel 225 600lbs .710 $2133.03
go to
SBF 220cc
Flow Charts go to
SBF Head Options
AFR 220cc Renegade Street Head-tested on 4.125 bore Cylinder Head Flow Chart cfm @28" H2O
valve size .200 .300 .400 .500 .600 .700 .800
2.100 int. 149 205 264 296 318 334 338
1.570 exh. 126 173 220 246 251 255 258
go to
SBF 220cc
go to
Flow Charts
SBF Head Options Top
the AFR SBF Cylinder Head Options listed below
may only be ordered along with a complete set of AFR Cylinder Heads--
--keep in mind, free shipping for purchases totaling $2900.00 or more for USA zipcodes--
Item description price buy
titanium retainer --AFR upgrade #8508--10° Titanium Retainers and 10° Valve Locks installed in place of the steel retainers that are normally supplied $190.12
valve spring --AFR#8027 valve spring upgrade-replaces spring pn#8000 by the improved pn#8001 w/250lbs seat pressure and 760lbs open pressure (@ .800 lift) with a max lift of .800 $161.02
valve spring --AFR pn#8051 option--(for Hi=RPM Hydraulic roller cams only)--mechanical roller valve spring pn#8000 is replaced by the lighter hydaulic roller valve spring pn#8002 w/170lbs seat pressure and 473lbs open pressure (@.600 lift) with a max lift of .650 (check with your cam manufacture for necessary spring pressures) $55.00
valve spring --AFR #8050 valve spring option for solid flat tappet cams and hyd rollers, (check with your cam manufacture for necessary spring pressures) trades the 8000 spring for the 8016 spring, that is 1.550 diameter, 140 lbs seat and 375 lbs open at .525 lift with a max lift of .600 (check with your cam manufacture for necessary spring pressures) $55.00
comp cams ultra pro magnum rocker --Comp Cams ULTRA Pro Magnum Roller Rocker-choice of 1.6 ratio for 3/8 or 7/16 rocker stud-"Lifetime Guarantee" so strong that the body is guaranteed for life against breakage and unlike alum. rockers, rockers can be rebuilt by replacing the trunion, roller tip, and bearings thru Comp Cams-

the AFR SBF Cylinder Head Basic Package Components are listed below
and a few specifications and suggestions for Supporting Components--NOTE: All AFR 220cc heads have 1/2" head bolt holes, so if the block you are using has 7/16" threads for the head bolt, you will need a head bolt/stud kit that contains the 1/2"-7/16" reducer bushing-see head bolts just below
parts incl. w/Heads part # some suggestions
Intake Valve 2.100x5.006 Oal #7256 Cyl Head torque w/moly--70lbs(7/16")
Exhaust Valve 1.570x5.024 Oal #7248 Cyl Head torque w/moly--100lbs(1/2")
Mech Roller Spring-1.550 225/600lbs AFR #8000 Rocker stud Torque--------55lbs
Manley 10° Chrome Moly Retainer 8511 Exh Gasket----------AFR#6839 or FP#1487
Int Gasket(1.400x2.25)--FP1262/AFR6832
Bead Lock 10° valve keepers AFR#9009 7/16" Head "Bolts"
--ARP#154-3601(6pt) or #154-3701(12pt)--
7/16" Head bolts with 1/2"-7/16" Bushing
--ARP #154-3605(6pt)or #154-3705(12pt)--
Adjustable Guide Plates-5/16 #6103 7/16" Head "Stud" kit
--ARP#154-4001(6pt) or #254-4401(12pt)--
7/16" Head Stud kit with 1/2"-7/16" Bushing
--ARP#154-4005(6pt) or #154-4205(12pt)--
Viton Valve Seals #6612 1/2" Head "Bolts" --ARP#154-3603(6pt)
Rocker Stud-7/16 #6405 1/2" Head "Stud" kit
--ARP#154-4003(6pt) or #154-4203(12pt)
Hardened Spring Cup #8048 (Int and Exh) Manifolds------Vic Jr, Super Victor
Intake Valve Seats #9058 Spark Plugs-----Autolite 3922
Exhaust Valve Seats #9069 Stud Girdle----------AFR#6207
Bronze Valve Guides-(Int and Exh) #9051 valve spring pockets can be cut to 1.625, no deeper
valve spacing------60/40